PRODUCTS
Wire & Cable, Cable Accessories, Telecom Accessories, Energy Saving Lamp(CFL)...
КПСЭ нг(А)-FRFH 4×1.0mm² shielded Fire Alarm Cable
КПСЭ нг(А)-FRFH 4×1.0mm² shielded Fire Alarm Cable
КПСЭ нг(А)-FRFH 4×1.0mm² shielded
Fire Alarm Cable |
|
|
Cable construction : |
Conductor: |
Bare copper class 14×1.13mm |
|
|
Insulation: |
Type: Silicone Dia.over Dielectric: 0.094''''nom.(2.4mm) |
|
|
Insulation Color: |
Blu/Brn/Blk/Gry |
Separator : |
PET Foil |
Drain Wire: |
0.4 mm Solid tinned copper |
Shield: |
Aluminum PET (100% Coverage 20% overlapping) |
Jacket: |
FRFH -LSOH |
Dia.over Jacket: 0.287''''(7.30mm) |
Print Legend: |
HELLOSIGNAL NO.7110570 КПСЭ нг(А)-FRFH 4×1.0mm² shielded Cable MMDDYYYY |
|
Electrical Properties : |
Minimum Bend Radius |
8×Diameter |
Min.DC resistance |
18.8 ohm/KM |
Min.Insulation resistance |
100 MΩ/km |
Installation Temperature |
-10℃~+50℃ |
Test voltage (rms value) |
1000V |
Max. Operating Voltage |
300 V |
|
Test Standards |
√180 minutes under fire of 750 degrees without short-circuit. |
√Fire hazard class of the cable on the classification of ГОСТ Р 31565-2012 - P1.1.2.2.2. |
√Cable flame retardant while installing in category A (ГОСТ Р IEC 60332-3-22-2005). |
√Indicator toxicity of the combustion products of polymeric material of the cable - not less than 41g / m. |
√Smoke generation during combustion and smoldering cable does not reduce the light transmittance of more than 50% (GOST R IEC 61034-2-2005). |
√The cable is designed for fixed installation for voltage to 300 V AC to 10 kHz or 420 VDC. |
|
|
Order Informations : |
Package |
100M/Reel,200M/Reel,500M/Wooden Spool |
Delivery time |
Normally 25 days after received the deposit. |